Louver Shutter with Cross Rail - Price is per pair
Paint Grade unfinished (not treated) Pine (custom woods available per quote)
This shutter is designed for non-operable openings. If you are going to open and close your shutter please request a quote for our Classic shutter designed to operate (wider stiles and rails).
If ordering more than 1 pair of shutters please request a freight quote.
Pine Stock Specifications
Stiles & Top Rail: 1-3/4"
Cross Rail: 2-3/16" Face
Bottom Rail: 3-5/8" Face
Thickness: 1-1/16"
Slat Size: 1-1/4" ( approx 1" visible from exterior)
Stock widths will be 1/4" under the nominal.
Louver slats will move with the change of humidity. This is not a defect.
Wood is a natural material and if not properly maintained, will deteriorate and rot.
Wood shutters must be primed and painted on ALL sides with a minimum of 2 coats of paint.
Wood shutters should not be installed flush to a surface. If you are not using shutter hinges then install the shutter with an 1/8" gap between the wall and the shutter to allow air to circulate.
Measuring For Shutters
Always measure in inches
A — First, measure the width of the opening between casings on the outside of your window. Take that measurement and divide by two. This will be the width of the shutter you will need.
B — Next, measure the height from the top of the sill to the header casing. Specify this as the height of your shutter.
PLEASE BE SURE TO DOUBLE CHECK YOUR MEASUREMENTS