Browse Categories
Shopping Cart
Your cart is empty.

Sideplate Lockset 16 Height 8-1/4" Keyed

<< Previous in Sideplate Locksets Next in Sideplate Locksets >>

Lost Wax Bronze Levers & Knobs

Product Options



* denotes required field

Emtek Levers and Knobs*
Handing for Levers Only
Select Finish*
Backset (2-3/8" is standard, specify 2-3/4" if required)*
Keying Options*
If you chose Key to Number, fill out the blank below; otherwise, leave it blank.
Input 5 digit Schlage Key Number
Lost Wax Cast Bronze Tubular #16 8-1/4" Keyed Plate  
  • Lost Wax Cast Bronze Knob & Lever (choose Right hand or Left Hand).
  • Standard 2-3/8" square corner backset, 2-3/8" round corner or optional 2-3/4" backset latch in round or square corners. 
  • Standard 2-1/8" Door Prep
  • 3-5/8" Center to Center Hole Spacing
  • Schlage C Keyway
6020 Passage/Single Keyed -  Deadbolt operated by key outside or thumb turn inside.
6021 Passage/Double Keyed - Deadbolt operated by key both sides.
6025 Dummy Pair - Acts as pull only. For inactive leaf of double doors. No operation.

Determining handing for door hardware is different than determining handing for carpentry (ordering and hanging doors). If you follow the standard carpentry rules for handing door hardware, instead of following the diagram below, there is good chance you may end up with a lock that is handed incorrectly. Please refer to the diagram below and if you have any questions, call Customer Service at (800) 518-0781.

  • The outside of an exterior door is the street or entrance side.
  • The outside of a room door is the hall side.
  • The outside of a closet door is the room or hall side.
  • The outside of a single communicating door is the side from which the hinges are not visible when the door is closed.
Shopping Cart
Your cart is empty.