|
|
Fire Rated: Vision Panels
Low Profile Vision Panels: Fire Rated
For 1-3/4" doors (wood or metal) & 1/4" Glass.
Glass sold separately.
Material: 18 Ga. (33% thicker than 20 Ga. frames)
Email for quote on Galvanized for exterior or Stainless Steel for hospitals, wood veneer wrapped and custom colors.
Finish: Beige is standard. Gray or Dark Bronze polyester powder coating at no additional charge.
Mounting Holes:
- 11" length or less, one hole centered
- Over 11", 3" maximum from corners, 11-5/16" maximum centers.
Glass Note: For non-fire rated applications we recommend 1/4" tempered glass. For laminated glass (not recommended) glazing tape and a light torque on the screws is required to prevent glass breakage.
Stock Sizes:
10 x 10 order size:
Door cut out size 11-1/2"w x 11-1/2"h
Glass Size 10-3/4" x 10-3/4"
4 x 25 order size:
Door cut out size 5-1/2"w x 26-1/2"h
Glass Size 4-3/4" x 25-3/4"
5 x 20 order size:
Door cut out size 6-1/2"w x 21-1/2"h
Glass Size 5-3/4" x 20-3/4"
Order size = inside dimension of frame
Cutout size = order size + 1-1/2"
Glass size = order size + 3/4" (tolerance +0/-1/16")
Limited warranty: Vision panels to be free from defects in materials and workmanship. Purchaser assumes responsibility to verify and determine that color, finish, and quality of materials will meet required specifications.
No claim shall be allowed unless Purchaser gives notice within 30 days from the date materials are received. If color match, finish quality, or glass and cutout fit are not satisfactory , DO NOT INSTALL. UPON INSTALLATION THIS WARRANTY ENDS.
Manufacturer's only obligation shall be replacement, refinishing or refund of the original purchase prices at manufacturers option. This warranty does not apply to door hardware which has been abused, altered, improperly installed, used with incompatible or inappropriate components (EX oversized glass), exposed to corrosive environments or environments for which the product is not intended. No material shall be returned without prior authorization.
90-minute glass for 10x10, 4x25 & 5x20 metal frame insert kits.
| | |
|
|
|