The Madison Cupola has a hexagon base with a pagoda style roof
Call for Quote at (800) 518-0781 or Click to Email
This attractive Windowed Cupola is virtually Maintenance-Free, made with a wood frame that is completely wrapped in coated aluminum with a 16 oz. Copper roof. You will never have to paint this Cupola!
Your Cupola will arrive complete in a wood crate, in three easy-to-assemble sections. We will pre-cut the roof pitch into the base section for you, to accommodate your roof line. Mounting hardware, and easy to follow instructions are included.
Louvered Cupolas come with an insect screen to keep pests and debris out. This Cupola can be used for ventilation, cutting cooling costs in the summer and reducing moisture buildup in the winter, or simply for decoration to add a touch of class to any structure.
You can add a light kit to one of our Louvered Cupolas for a beautiful night time glow. Weathervanes are optional and cost extra.
Cleat
Our Cupola mounting cleat is an attachment point from inside the cupola, made from sturdy 2x4, 2x6 or 2x8 materials. Size of the cleat is determined by the size of the cupola and ventilation needs. This cleat typically runs with the pitch cut out on the inside of the base section. This option is typically used for fitting the cupola over existing shingles.
Curb
The optional Cupola mounting curb is a 2x8 structure that would be mounted before the roof is to be shingled. The curb is then flashed by the roofer, allowing the cupola to be mounted later, therefore not holding up the roofers. The cupola then slides over the top of the flashed curb and is bolted to the curbing producing a strong watertight seal.
Way To Unload
This question is referring to a forklift or some other way of unloading a crate. Our cupolas are packaged in a strong wooden crate for protection and usually are too heavy to lift by hand from the truck. If you select no, we will send a truck with a lift gate to lower your cupola for you. This will affect your shipping cost.
Ventilating and Non Ventilating
This question refers to whether the customer will cut a hole in their roof to allow for ventilation. Either way, the louvers on the cupolas will be open. But, we resize the mounting cleat or curb to accommodate the airflow or lack of. This also helps us to determine the best type of mounting hardware for an easy installation.
Roof Pitch
This question refers to the pitch of the roof where the cupola will be placed. This will be pre-fabricated into the cupola base section to create an exact fit onto the existing roof slope.
Standard Gable
A standard gable would be a straight ridge line roof with gable ends. The cupola to fit this style roof would have two triangle pitch cuts on opposite sides.
Hip Roof
A hip roof would have any number of sides (4, 6, 8) that travel up to a point. In this case, we would not cut a pitch in the cupola base but would mount the cleats on the specified pitch to match the roof.
Finish
Our PVC finish has a slight wood grain texture and is our most popular cupola finish. Smooth is a baked enamel finish that is smooth to the touch.
Color
The color selection below shows a small sample of the available 400+ colors we offer. We can match most paint or trim colors within a couple of shades. Please be aware that the colors shown here are not exact and may differ from monitor to monitor. To obtain an actual material sample please email.
Made to Order - Not Returnable.
Sizes: Width of Base x Height
26" x 55"
30" x 61"
36" x 68"
48" x 80"