Browse Categories
Browse by Manufacturer

Door Louver Inserts: Metal Chevron

<< Previous in Louver Inserts Next in Louver Inserts >>

Email for Quote: Ships in about 2 Weeks
Aluminum Louver Door Inserts - Chevron Louvers

MATERIAL: 18 GA. (1.2mm) Cold Rolled Steel - Frame.; 22 GA. (.75mm) Cold Rolled Steel - Louver Blades.

FINISH: Grey Primer, Beige or Bronze Baked Enamel.

INSTALLATION: Use #8x1" (25mm) phillips screw that fastens auxiliary frame to the louver core, thru the cutout in the door, thus eliminating the need to drill holes in the door for thru bolts.
This method saves time and installation labor and leaves the corridor side of the frame free of fasteners for added security, and a cleaner aesthetic appearance.

DOOR THICKNESS Options: For 1 3/4" (44mm), Door 1-3/8"(35mm), 2" (50mm) and 2 1/8" (54mm) are available. Louver core may be offset.

AESTHETICS: Tight mitered corners, no visible welds, countersunk mounting holes and corridor side of frame free of fasteners make for a clean, streamlined appearance

USES: Anywhere air flow is required thru a door.

FREE AIR FLOW: 50% Free Area.


MATERIAL: #304 or #316 Stainless Steel, #4 Finish(Satin), Galvanized (Coil, Hot Dipped or Zinc Plated), Mill Finish or Anodized Aluminum (#5052 Alloy), 16 gauge (1.5mm) Cold Rolled Steel or Stainless Steel.

For Exterior use, High Humidity or Salt Air application, product must be Galvanized or Stainless Steel.

FINISH: Custom Baked Enamel Colors (as per sample paint chip, supplied by customer).

FASTENERS: Special Security Screw Fasteners.

SPECIALS: Fractional sizes (frame dimension is increased to accomodate odd size).

SCREENS: Mesh insect screens are loose, attached or framed. (Galvanized, Aluminum, Charcoal Aluminum, Stainless Steel.) 

FIRE RATING: This louver is not fire rated. Fire rated frames are available per quote.

Email for Quote: Ships in about 2 Weeks